1. Login to the website as only registered users can set markers.

2. Use Search box to find your address:

3. When you location is found just click to select it. Please note that Search functionality is handled by google and will not work in some countries. If your location is not found you will need to find it on the map manually.

4. Select the desired Satellite position and beam:

5. Click your marker and then "Set marker here" button. New popup window will be opened.

6. Click "Add" button to start entering your reception data. New line will be inserted. Please note that you can add as many lines as you want just make sure to "Save" at least every 3-5 inserts.

7. Start entering desired frequency or just select transponder from the dropdown list (Polarisation, FEC and SR fields will be propagated automatically).

If the desired frequency is not listed and you want to report a new one just enter it manually and you will be prompted to complete remaining transponder information. Please make sure to select the beam that the transponder belongs to and if you are not sure which beam to choose please set it to "Unassigned".

8. When the transponder data is completed please enter the signal strength and quality. As most of the receivers have different thresholds percent scale should be used. If you cannot lock the signal at all please set quality level to "0". That would mean that no reception was possible at the given date/time with the specified dish size and respective "crossed" marker will be placed on the map.

9. Now select your antenna model.

If your antenna's "manufacturer/model" is not listed then just type them into the filed and press "enter". You will be prompted to enter remaining antenna details into additional popup form.

If you do not know which manufacturer/model your antenna is you may select from the list "Generic" dish of appropriate size or add it with "Unknown" manufacturer and for example "offset" model and indicate its size in cm (inches are currently not supported).

9. Now select your receiver:

If your receiver is not listed then you will be prompted to enter your receiver details:

10. Finally select your Lnb:

If you Lnb is not listed please add it:

11. Once frequency is added you can add another line or click "Save and Close" button to finish.

12. You can view the list of channels of the transponder by clicking "List" button in Channels column